Table of Contents
Advertisement
A
CAMERA OVERVIEW
MODE SWITCH
Aim - When Aim is ON and the PIR Motion Sensor detects motion, the Status Indicator's red LED on the front of the camera will come on and remain lit
as long as motion is detected. Custom Start - set and run camera with custom settings. Quick Start - set and run camera with pre-defined settings.
NAVIGATION BUTTONS
The Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and RIGHT buttons navigate through the menu
options. The Menu Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode. The
OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through and modify the menu options. Pressing
the OK button again, selects the option indicated on the display. The OK button is also used to manually take a picture.
BATTERY COMPARTMENT
The camera is powered by eight (8) AA alkaline or lithium batteries. Push the battery compartment release button to eject the battery tray. Install
batteries as indicated on the engravings on the battery tray, taking care to note the correct polarity. See Important Battery Information section on
Page 15 of this manual.
SD CARD SLOT
Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera to
operate (sold separately). Ultra/turbo SD cards are not recommended.
USB PORT
Download still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port.
EXTERNAL POWER PORT
Accepts the Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
4
B
QUICK START INSTRUCTIONS
Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings.
STEP 1
Open camera cover. Install eight (8) AA size alkaline or lithium batteries with polarities as indicated in the Battery Tray. Insert your SD card. We
recommend that you erase the SD card (ERASE IMAGES) inside the camera before taking pictures: this will not only erase all images, but will also
format your SD card for use in the camera. Camera will not operate without SD card.
STEP 2
Mount camera in desired location using a mounting strap. The camera also has two Python™ Cable Loops
for added security. NOTE: Camera must be attached to a stable object for motion detection to function
properly. Mounting camera on an unstable structure may result in excess image captures with
no subject (false triggers).
STEP 3
Switch camera to Aim. Aim camera using motion detection to determine
target area. Walk in front of the camera at the desired distance and the
camera LED will flash showing the covered area.
STEP 4
Switch camera to Quick Start. Close cover. The camera will operate using Default settings.
You may also customize the settings if desired in Custom Start.
Setting Run Mode
OPTION
When you choose Quick Start, the only settings
Mode
that you will be able to change will be Date and
Time, allowing for rapid setup. Other settings are:
Detection Delay
Multi-Shot
Photo or Video
Eyelet
SETTING
Motion Detect
30 seconds
Mounting Strap
Python™ Cable
3-Triggered
Loops
Photo
5
Advertisement
Table of Contents
