Moultrie mcg-12688 Instruction Manual

• ON 10s
• IRAIM 30s
AM
IV 8 8 : 8 8
A-SERIES DIGITAL GAME CAMERAS
• SETUP 1m
PM
OFF 5m
• ON ON -
10
• IRAIM
After countdown, the camera will enter Capture Mode
• SETUP
based on user settings.
OFF
AIM -
• ON
• IRAIM
Display will show "lr" indicating that IR AIM test mode is
• SETUP
active. The red Status Indicator will light when motion
OFF
is detected.
• ON SETUP -
AM
1 1 : 1 1
• IRAIM
The display will show currently set time. To setup
• SETUP
the camera, follow the Menu Flow Chart below.
OFF
• ON OFF -
• IRAIM
• SETUP
OFF
S E T T I M E
SET CAMERA TIME & DATE
ENTER
Setting Time and Date
While the camera is in the Setup mode,
the LCD display will show the time.
Press the Enter button and the selection
will flash. Use the UP/Down buttons
to change the selection. Press the Enter
button to lock in the selection and move
to the next selection. Repeat the process
to set the year, month and day.
• HIGH
ENTER
• LOW
• VIDEO
A countdown from 10-0 will apper on the display.
Use this setting to find your desired detection area.
Slide switch here to begin the setup process.
No camera or display activity.
S ET DA TE
ENTER
SET CAMERA ID
Setting Camera ID
Use the Up/Down buttons to choose
between nine different numbers
(1-9) to help identify your cameras
(i.e. "CAMERA 3" will be marked on the
info strip given 3 was selected). Press
Enter to lock in your selection and
move to the next selection.
AM
8 8 : 8 8
PM
10
Setting Time Delay
To set the time delay, slide the
Delay switch to the desired time.
There are 4 time delay settings:
10 seconds
30 seconds
1 minute
5 minutes
AM
1 1 : 1 1
SET CA ME R A ID
ENTER
SET MULTI-SHOT
ENTER
Setting Multi-Shot
Use the Up/Down buttons to choose between settings.
Choose how many pictures you would like captured in a
sequence when the camera is triggered (1 or 3).
Available options are:
1 (OFF) - Single photo taken per event.
3 PHOTO - Three photos are captured per event with an
approximate one second delay between each capture.
Press Enter to lock in your selection and move to the
next selection.
UP Button - Increase individual value
• ON 10s
• IRAIM 30s • HIGH
ENTER Button - Confirm a selection
ENTER
• SETUP 1m • LOW
5m • VIDEO
OFF
DOWN Button - Decrease individual value
• ON
• IRAIM Setting Image Quality or Type
• SETUP
Slide the Resolution switch to the
OFF
desired setting.
Choose one of 3 settings:
• ON
High Photo
• IRAIM
Low Photo
• SETUP
Video
OFF
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
SE T MU L TI-SH OT *
ENTER ENTER
ERASE IMAGES / FORMAT SD CARD
ENTER
Reset Picture Count/Erase Images/Format Card
After Multi-Shot has been set, you can reset the picture
SET T IME
count on the camera. Use the Up/Down buttons to choose
ENTER
between Yes or No. Press the Enter button to confirm the
selection.
"Yes" will reset file number to start from 0001 and erase
all images stored on the SD card.
NOTE: This will also format your SD card for use in
your camera.
ENTER
ER A SE IMAG ES/FO RM AT SD CA RD
SE T DATE
ENTER