Table of Contents
Advertisement
A
CAMERA OVERVIEW
MODE SWITCH
Aim - When Aim is ON and the PIR Motion Sensor detects motion, the Status Indicator's red LED on the front of the camera will come on and remain lit
as long as motion is detected. Additionally, a live view from the camera will be displayed on screen to show the area that will be captured in photos
or videos. Custom Start - set and run camera with custom settings. Quick Start - set and run camera with pre-defined settings. Playback - view
recorded photos or videos on the camera's TFT screen.
NAVIGATION BUTTONS
The Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and RIGHT buttons navigate through the menu
options. The Menu Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode. The
OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through and modify the menu options. Pressing
the OK button again, selects the option indicated on the display. The OK button is also used to manually take a picture.
BATTERY COMPARTMENT
The camera is powered by twelve (12) AA alkaline or lithium batteries. Push the battery compartment release button to eject the battery tray.
Install batteries as indicated on the engravings on the battery tray, taking care to note the correct polarity. See Important Battery Information
section on Page 15 of this manual.
SD CARD SLOT
Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera to
operate (sold separately). Ultra/turbo SD cards are not recommended.
USB PORT
Download still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port.
EXTERNAL POWER PORT
Accepts the Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
4
I
MEMORY OPTIONS
Managed Memory
Selecting the OVERWRITE OLDEST option will cause the oldest files to be overwritten with
new captures when the SD card reaches its capacity. With the DO NOT OVERWRITE option
selected, the camera will cease image capture once the SD card reaches capacity.
Erase Images
Choose between Yes - erase all images, or No - does not change stored images.
NOTE: This will also format your SD card for use in your camera.
J
SYSTEM OPTIONS
Security Code
Select a 5 digit security code for your camera.
NOTE: Please remember your security code. If the code is lost, you can contact Moultrie
customer support to reset the password (charges may apply). Also, use caution when navigating
through the Security Code option as not to set a code by mistake. For no Security Code, the
setting should remain as "00000".
MEMORY SETTINGS
MANAGED MEMORY
X
Do Not Overwrite
Overwrite Oldest
MEMORY SETTINGS
ERASE ALL IMAGES
X
No
Yes
NOTE:
Erasing images will also
format SD card
SYSTEM SETTINGS
SECURITY CODE
0 0 0 0 0
13
Hide quick links:
Advertisement
Table of Contents
