Table of Contents
Advertisement
14. Unfold left & right side shelf and wind shield
and place the tabs of the side wind shields into
the small openings securing the windshield.
15. Place the flame tamer in the firebox and secure them.
Then place the cooking grids in the firebox as shown
below.
16. Put the grease cups (K) into grease cup holder (J).
Then hang the grease cup holder on the bottom of the
firebox, as shown below.
J
Assembly Instruction
17. To install the battery, turn the ignition button cap
counterclockwise and remove it. Insert the battery into
the housing with the positive (+) terminal facing outward.
Screw the ignition button housing back into place.
NOTE: Rubber stoppers should only be used for
transportation of the unit. Place rubber stopper
into grease drainage hole when you have
finished cooking and the grill has cooled. This
will help to keep grease from dripping from the
firebox during transport.
WARNING
Please remove the rubber stopper from the
grease hole before using.
K
continued
12 12
Advertisement
Table of Contents
