AEG L6TNE621G User Manual page 22

22 www.aeg.com
11.4 Liquid or powder
detergent
1
3
• Position A for powder detergent
(factory setting).
• Position B for liquid detergent.
When you use the liquid
detergent:
• Do not use gelatinous or
• Do not put more liquid
• Do not set the delay start
11.5 Setting a programme
1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause
flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set option
comes on.
CLICK
CLICK
thick liquid detergents.
then the maximum level.
function.
2
4
In case a selection is not
possible , no indicator
comes on and an acoustic
signal sounds.
11.6 Starting a programme
without the delay start
Press button Start/Pause
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
The drain pump can operate
for a short time when the
appliance fills water.
A
B
to start the
.