NME654R & FME804R
OPERATION: Water
Water enters the machine through the 3/8" male
flare at the rear of the cabinet, goes to the water
Water Level: The correct water level should be
checked when the machine is making ice. Locate the
reservoir which it enters through the float valve.
water level in the reservoir and compare it to the
The water them goes out the bottom of the
horizontal line molded into the side of the reservoir.
reservoir tank to the bottom of the evaporator.
The correct level should be between
" above and
"
1
1
Reservoir overflow or evaporator condensation is
8
4
below the line. If needed, bend the float arm up or
routed to the drain.
down to adjust the water level.
RESERVOIR
DRAIN TUBE
WATER LEVEL
WATER
INLET
DRAIN
January 2000
Page 17