For The Plumber; Water Inlet - Scotsman FME804R Service Manual

FOR THE PLUMBER

FIELD SUPPLIED
WATER FILTER
HAND SHUT
OFF VALVE
CONNECT TO
COLD WATER
VENT BIN DRAIN
3/4" FPT
FLOOR DRAIN
CONFORM TO ALL APPLICABLE CODES

WATER INLET

3/8" MALE
NME654R & FME804R
The recommended water supply is
cold water. Use 3/8" O.D. copper
tubing, connect to the 3/8" male flare
at the back of the cabinet. Install a
hand valve near the machine to
control the water supply.
There is one ¾ " FPT drain at the
VENT ICE
back of the cabinet, the drain line is of
MACHINE
the gravity type, and ¼ inch per foot
DRAIN, 3/4"
fall is an acceptable pitch for the drain
FPT
tubing. There should be a vent at the
highest point of the drain line, and the
ideal drain receptacle would be a
trapped and vented floor drain. Use
only ¾ " rigid tubing.
Storage Bin: Install a separate
gravity type drain. Insulation of this
drain line is recommended.
January 2000
Page 9
Water Inlet
Drains