For The Installer; Specifications - Scotsman FME2400 Service Manual

NME1850 & FME2400

FOR THE INSTALLER

The FME2400 and the
NME1850 are designed to fit
the following Scotsman storage
bins:
B90 and extensions
(with bin top KBT18)
BH800 no bin top required.
BH900 using bin top KBT14.
BH1360, no bin top required.
When installing a new system,
check to be sure that you have
everything you need before
beginning:
Correct Bin
Correct Ice Machine
Correct Bin Top (if required)
All kits, legs, and information
required for the specific job.
Note: Allow 6" behind and
6" above the unit for air
circulation, utility
connections, and service.
The normal finish for the ice
machine is
enamel-sandalwood. A
stainless steel panel kit,
SPECIFICATIONS : ICE MAKER
Model Dimensions
(w/o Bin)
W x D x H
FME2400AE-32A 42" x 24" x 27" 208-320/60/1 Flake
FME2400WE-32A 42" x 24" x 27" 208-320/60/1 Flake
FME2400AE-3A 42" x 24" x 27" 208-230/60/3 Flake
FME2400WE-3A 42" x 24" x 27" 208-230/60/3 Flake
NME1850AE-32A 42" x 24" x 27" 208-320/60/1 Nugget
NME1850WE-32A 42" x 24" x 27" 208-320/60/1 Nugget
NME1850AE-3A 42" x 24" x 27" 208-230/60/3 Nugget
NME1850WE-3A 42" x 24" x 27" 208-230/60/3 Nugget
BACK VIEW
Condenser Inlet (W/C):
3/8" FPT
5.25"
9.5"
3"
TOP VIEW
Ice Chute
2.64" x 6.2"
Basic
Electrical
January 1994
Page 2
14.9"
15.8"
18.74"
18.9"
34.84"
Ice Type Condenser
Type
Air
Water
Air
Water
Air
Water
Air
Water
Electrical Inlet
Water Inlet 3/8" Flare
Drain 3/4" FPT
Condenser Drain (W/C):
1/2" FPT
6"
18.28"
13.84"
Refrigerant Charge*
Air Cooled 30 oz.
R-404A
Water 24 oz.
Cooled R-404A
* Per system. Always go
by the nameplate.