For The Electrician - Scotsman FDE474 User Manual

FDE474

For The Electrician

Electrical connections:
Check the nameplate for voltage and current
requirements. An electrical cord is not supplied.
Connect the FDE474 to a separate electrical
circuit. Wiring to the machine must conform to all
codes. A licensed electrician may be required in
some situations.
Remove the back panel to make the electrical
connection. The electrical connection is made on
the terminal strip in the junction box inside the
machine. Replace the back panel when the
FOLLOW ALL APPLICABLE LOCAL, STATE
electrical connections are complete.
AND NATIONAL CODES
This Unit MUST BE GROUNDED
Electrical
Power
Remove Back Panel To
Expose Junction Box
March 2000
Page 4