Advertisement
34
English
Problem
I replaced the
shaving heads, but
the display still
shows the
replacement
reminder.
A shaving unit
symbol has
suddenly appeared
on the display.
The notification
symbol flashes and
the shaver beeps
while the shaver is
charging.
The notification
symbol flashes and
the shaver beeps
when I try to shave.
The notification
symbol flashes and
the shaver beeps
after cleaning the
shaving heads.
Water is leaking
from the bottom of
the appliance.
Possible cause
You have not reset
the appliance.
This symbol reminds
you to replace the
shaving heads.
The appliance is
overheated.
The shaving heads
are soiled.
The shaving heads
are damaged.
During cleaning, water
may collect between
the inner body and
the outer shell of the
appliance.
Solution
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
Replace the shaving heads
(see 'Replacement').
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the shaver
has decreased to the
normal level after approx.
10 minutes.
Clean the shaving heads
(see 'Cleaning and
maintenance').
Replace the shaving heads
(see 'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
Advertisement
