Advertisement
26
English
Cleaning the trimmer attachment
6 Clean the cutter and guard under the tap.
You can also use the cleaning brush to remove
excess hairs before rinsing.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
holder.
10 Place the retaining ring on the shaving head.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the ring
is fixed.
12 Attach the shaving head holder to the bottom part
of the shaving unit ('click').
Never dry the trimmer with a towel or tissue, as this
may damage the trimming teeth.
Clean the trimmer attachment after each use.
Switch on the appliance with the precision trimmer
1
attachment attached.
Advertisement
