Advertisement
Thorough cleaning
1
2
6 Attach the shaving head holder to the bottom part
of the shaving unit ('click').
We advise you to clean the shaving heads thoroughly
once a month or when the shaver does not shave as
well as it used to.
Switch off the shaver.
1
2 Pull the shaving head holder off the bottom part of
the shaving unit.
3 Rinse the hair chamber and shaving head holder
under the tap.
You can also use the cleaning brush to remove
excess hairs before rinsing.
4 Turn the retaining ring counterclockwise and lift it
off the shaving head.
Repeat this process for the other retaining rings.
Place them aside in a safe place.
5 Remove the shaving heads from the shaving head
holder. Each shaving head consists of a cutter and
guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal
shaving performance is restored.
25
English
Advertisement
