Rack Mounting - Telex RADIOCOM BTR-300B Operating Instructions Manual

RACK MOUNTING

To rack mount the BTR-300 base trans ceiver
do the fol low ing:
Re move the front two #6-32 x 3/8" screws on
each side of thetrans ceiver as shown in Fig ure
17.
Fig ure 17
Attaching Brackets For Rack Mount ing
-18-
Place the rack mount brack ets (sup plied) on ei -
ther side of the unit and in sert three #6-32 x
3/8" screws for each bracket. Tighten the
screws se curely.
In sert the BTR-300 into your 19" rack en clo -
sure and in sert four (4) #10-32 x 3/8" Phil lips
pan head screws (sup plied) in each cor ner of
the rack mount brack ets and se cure to your en -
clo sure.