Specifications - Scotsman CME1002W User Manual

CME865W & CME1002W

SPECIFICATIONS

Before beginning installation, be sure that all of the
components necessary for complete assembly of
the ice system are available, and are the correct
components with regard to model, voltage, and
finish.
A stacking kit (KSCMS) is required for stacking
CME1002 or CME865 ice machines. It
interconnects the sonar bin ice level controls. A
CME865 or CME1002 may only be stacked onto
models CME865, CME1002, MCM1062 or
CMS1002.
Model Number
CME865WE-32A
CME865WE-6A
CME1002WE-32A
CME1002WE-3A
CME1002WE-6A
* The system charge is in the machine. This number is for recharging purposes only. If the nameplate has a
different value, go by the nameplate.
Minimum
Maximum
Dimensions Basic Electrical Minimum
W" x D" x H"
30 x 24 x 27 208-230/60/1
30 x 24 x 27 30/50/1
30 x 24 x 27 208-230/60/1
30 x 24 x 27 208-230/60/3
30 x 24 x 27 30/50/1
Air Temperature
0
50 F.
0
100 F.
December, 1994
The CME865 or CME1002 will fit any current 30"
wide Scotsman bin, such as the BH550 or
HTB555, without needing a bin top. Other bins will
require a bin top.
Note: The sonar transducer, located in the base of
the machine, must NOT be covered by installation
material (such as a non-Scotsman bin top). The
transducer must have clear access to the ice to be
able to sense the ice level.
Circuit
Ampacity
14.5
18.5
12.3
Water Temperature
0
40 F.
0
100 F.
Page 2
Maximum Refrigerant
Fuse Size Charge*
R-404A
20 36 ounces
36 ounces
20 38 ounces
15 38 ounces
38 ounces
Voltage
-5%
+10%