Table of Contents
Advertisement
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Technical Specifications
Model
Electrical
(volts/Hz/phase)
EH330SL-1D
115/60/1
EH430SL-1D
115/60/1
ECC1200-32
208-230/60/1
ECC1410-3
208-230/60/3
ECC1410-32
208-230/60/1
ECC1800-3
208-230/60/3
* See Cabinet Drawings for exact dimensions.
Location Limitations
Maximum Distance between Head and Condensing
Unit: Limited to the length of the longest available
single tubing kit, 75 feet.
Maximum Condensing Unit Elevation over Ice Making
Head: 35 feet.
Note: Elevations greater than 20 feet require
installation of a suction line trap at the 20 foot mark.
Maximum Ice Making Head Elevation over
Condensing Unit: 15 feet.
Line Routing:
•
Allowed: One rise after a drop.
•
Allowed: One drop after a rise.
•
Not Allowed: More than one rise after a drop
•
Not Allowed: More than one drop after a rise.
Model Number Locations
Ice Making Head
The dataplate on the back of the ice machine contains
the model number, serial number and electrical data.
A second plate, located behind the front panel at
the lower right front, also lists the model and serial
numbers.
Minimum
Maximum
Circuit
Fuse Size
Ampacity
3
15
3
15
17.8
30
9.1
20
14.5
30
19.0
30
Condensing unit
The dataplate on the condensing unit contains the
model number, serial number, electrical data and
system refrigerant charge.
A second plate, located behind the front panel in front
of the compressor, also lists the model number, serial
number and refrigerant charge.
October 2014
Page 3
System
Cabinet Size*
Charge oz of
w" x d" x h"
R-404A
-
30 x 24 x 23
-
30 x 24 x 29
224
32 x 39 x 39.75
224
32 x 39 x 39.75
224
32 x 39 x 39.75
232
32 x 39 x 39.75
Approx. Unit
Weight (lb)
130
165
Advertisement
Table of Contents
