Advertisement
10. Remove two screws.
11. Remove the top tray cover upward.
12. Pull the connector and FFC from control
PWB out.
13. Pull the connector and FFC out through
the apertures.
14. Remove four screws and then remove
the laser scanner unit upward.
15. Check or replace the laser scanner unit
and refit all the removed parts.
Y116540-5
Screw
Screw
Laser
scanner unit
Control PWB
Apertures
YC16
FFC
YC15
Connector
1-5-27
Top tray cover
Screw
Figure 1-5-44
Screw
Screw
Figure 1-5-45
Service Manual
Screw
Advertisement
