Advertisement
Codes
08
09
0a
0b
0c
0d
0e
0f
10
11
12
13
14
15
16
17
18
19
1a
1b
1c
1d
Service Manual
Description
Black band is not detected (DP main scan-
ning direction far end)
Black band is not detected (DP main scan-
ning direction near end)
Black band is not detected (DP auxiliary
scanning direction leading edge)
Black band is not detected (DP auxiliary
scanning direction leading edge original
check)
Black band is not detected (DP auxiliary
scanning direction trailing edge)
White band is not detected (DP auxiliary
scanning direction trailing edge)
DMA time out
Auxiliary scanning direction magnification
error
Auxiliary scanning direction leading edge
error
Auxiliary scanning direction trailing edge
error
DP uxiliary scanning direction skew error
Maintenance request error
Main scanning direction center line error
DP main scanning direction skew error
Main scanning direction magnification error
Service call error
DP paper misfeed error
PWB replacement error
Original error
Input gamma adjustment original error
Matrix adjustment original error
Original for the white reference compensa-
tion coefficient error
Turn the power supply OFF/ON and
performed again.
Turn the power supply OFF/ON and
performed again.
Adjust the below items in manual
operation.
(U065 to U067, U070 to U072)
Turn the power supply OFF/ON and
performed again.
Set the original correctly and per-
form again.
-
Set the original correctly and per-
form again.
1-3-56
Corrective Action
1. Check the attachment position of
DP.
2. Check a lighting of the lamp or
replace.
3. Check the back and front of an
adjustment original.
1. Turn the power supply OFF/ON
and performed again.
2. Adjust the below items in manual
operation.
(U065 to U067, U070 to U072)
1. Turn the power supply OFF/ON
and performed again.
1. Clean the contact glass and slit
glass.
2. Exchange the adjustment origi-
nal.
Y116540-5
Advertisement
