Storage Drive Activity Indicator - Lenovo v35s-07ADA Hardware Maintenance Manual

8. Install the card reader into the card reader bracket.
9. Install the card reader bracket.
10. Connect the new card reader cable to the system board.
11. Reinstall the removed parts.
12. Place the computer in an upright position.
13. Reconnect the power cord and all disconnected cables to the computer.

Storage drive activity indicator

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 46.
2. Remove the front bezel. See "Front bezel" on page 48.
3. Remove the optical drive. See "Optical drive" on page 49.
4. Remove the storage drive bracket. See "Storage drive" on page 50.
54
V35s-07ADA Hardware Maintenance Manual