Installing The Powered Graphics Card - Dell D31M Owner's Manual

Steps
1. Disconnect the power cables from the connector on the graphics card.
2. Remove the power cable from the routing guides on the cable holder.
3. Press the securing clips on both side of the cable holder and slide the cable holder out of the computer.
4. Push the securing tab on the graphics-card support bracket and rotate the bracket to move it away from the chassis.
5. Push and hold the securing tab on the graphics-card slot and lift the graphics card away from the graphics-card slot.

Installing the powered graphics card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the powered graphical processing unit and provide a visual representation of the
installation procedure.
70 Removing and installing Customer Replaceable Units (CRUs)