About this task
The following images indicate the location of the memory and provide a visual representation of the removal procedure.
Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot..
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
Repeat step 1 to step 2 to remove any other memory modules installed in your computer.
NOTE:
Note the slot and the orientation of the memory module in order to replace it in the correct slot.
NOTE:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
Installing the memory
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory and provides a visual representation of the installation procedure.
Removing and installing Customer Replaceable Units (CRUs)
59