Bosch IXO Original Instructions Manual page 10

10 | English
Under abusive conditions, liquid may be ejected from the battery;
u
avoid contact. If contact accidentally occurs, flush with water. If li-
quid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair person using only
u
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Safety information for screwdrivers
Use suitable detectors to determine if there are hidden supply lines
u
or contact the local utility company for assistance. Contact with elec-
tric cables can cause fire and electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes property damage.
Hold power tool by insulated gripping surfaces, when performing an
u
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Hold the power tool securely. When tightening and loosening screws be
u
prepared for temporarily high torque reactions.
Secure the workpiece. A workpiece clamped with clamping devices or in
u
a vice is held more secure than by hand.
Always wait until the power tool has come to a complete stop before
u
placing it down. The application tool can jam and cause you to lose con-
trol of the power tool.
Protect the power tool against heat, e.g. against con-
tinuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
Before any work on the tool (e.g. maintenance, tool change etc.) as
u
well as during transport and storage, set the rotational direction
switch to the middle position. There is risk of injury from unintentionally
pressing the on/off switch.
1 609 92A 4CX | (16.05.2018) Bosch Power Tools