Setting Digital Out - Sanyo DWM-450 Instruction Manual

Setting Digital Out

If the COAXIAL (Coaxial digital output) jack is connected to
the amplifier, you must set as follows:
1
4
7
0
+10
AUDIO SUBTITLE RANDOM Z O O M
SETUP
SETUP
ENT
TOP MENU
REPEAT A - B
1. Press [SETUP] in the stop mode.
"SETUP" screen appears.
SETUP
LANGUAGE
DISPLAY
DIGITAL OUT
PARENTAL
TVG
2. Press [5] to select "DIGITAL OUT".
3. Press [ENT].
"DIGITAL OUT" screen appears.
DIGITAL OUT
DOLBY DIGITAL
MPEG
96kHz LPCM
MAIN MENU
4. Press [a] to select the submenu.
5. Press [5] or [4] to select "LPCM" or "BITSTREAM".
DOLBY DIGITAL:
If your amplifier has Dolby Digital Decoder, select
"BITSTREAM". If not, select "LPCM".
6. Press [ENT].
The submenu is set.
2 3
5 6
8 9
P R O G R A M
M E N U
4, a, 5, b
ENT
RETURN
ANGLE
LPCM
BITSTREAM
7. Press [b] to skip back to "DOLBY DIGITAL".
8. Repeat steps 2 - 7 to set other items ("MPEG" and "96kHz
LPCM" ).
MPEG (Moving Picture Expert Group):
If your amplifier has MPEG2 Decoder, select
"BITSTREAM". If not, select "LPCM".
96kHz LPCM (96kHz Liner Pulse Code Modulation):
If your amplifier is available for 96kHz sampling, select
"96kHz LPCM". If not, select "48kHz LPCM".
Notes:
• When "48kHz LPCM" is set, 48kHz LPCM audio
signals are provided from the AUDIO OUT jacks,
not 96kHz LPCM audio signals.
• When playing back the DVD video disc which re-
corded with 96kHz LPCM, there is no digital output.
• However playing back the DVD video disc with no
copyright protection, the sound is original recorded
sound.
9. Press [SETUP] to close the screen.
Note:
To return to the "SETUP" screen, press [5] to select "MAIN
MENU", and press [ENT].
-E33-
Need help? Call
1-800-813-3435