Sanyo DWM-450 Instruction Manual page 10

Using RF Modulator
If your TV does not have a Video input jack and has an an-
tenna terminal only, please purchase the *RF Modulator (not
supplied).
(*Please consult your audio/video dealer.)
Example: DVD video player, TV and RF Modulator connec-
tions
To AUDIO
OUT jacks
P r L
Y
R
P b
C O A X I A L S-VIDEO OUT
AUDIO OUT
DVD video player
1. Connect the antenna cable (not supplied) to the ANT. IN
terminal of the RF Modulator.
2. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV terminal of the RF Modulator and the VHF/
UHF ANTENNA IN terminal of the TV.
3. Connect the Audio/Video cable (supplied) between the
AUDIO OUT and VIDEO OUT jacks of the DVD video
player and the AUDIO INPUT and VIDEO INPUT jacks
of the RF Modulator.
Example: DVD video player, VCR, TV and RF Modulator connections
Audio/Video cable (supplied)
To AUDIO
OUT jacks
P r
Y L
R
P b
C O A X I A L AUDIO OUT S-VIDEO OUT
DVD video player
1. Connect the antenna cable (not supplied) to the VHF/
UHF FROM ANT IN terminal of the VCR.
2. Connect the 75-ohm coaxial cable (not supplied) be-
tween the TO TV OUT terminal of the VCR and the ANT.
IN terminal of the RF Modulator.
3. Connect the 75-ohm coaxial cable (not supplied) be-
tween the TO TV terminal of the RF Modulator and the
VHF/UHF ANTENNA IN terminal of the TV.
Audio/Video cable (supplied)
To audio input
3
To AC
120V, 60Hz
RF Modulator
4
To AC
120V, 60Hz
RF Modulator
TV
jacks
A/V INPUT JACKS
TO TV ANT. IN
CHANNEL
VIDEO R-AUDIO-L 3 4
4
2
4. Turn on the TV, and set the channel number (CHANNEL3
or CHANNEL4) on both TV and RF Modulator, which-
ever is not used for regular broadcast in your area.
Note:
For more details, please refer to the instruction manual of
the RF Modulator.
To audio input
jacks
A/V INPUT JACKS
TO TV ANT. IN
CHANNEL
VIDEO R-AUDIO-L 3 4
5
VHF/UHF
ANTENNA
IN
3
4. Connect the Audio/Video cable (supplied) between the
AUDIO OUT and VIDEO OUT jacks of the DVD video
player and the AUDIO INPUT and VIDEO INPUT jacks of
the RF Modulator.
5. Turn on the TV, and set the channel number (CHANNEL3
or CHANNEL4) on all TV, VCR and RF Modulator, which-
ever is not used for regular broadcasts in your area.
Note:
For more details, please refer to the instruction manual of
the RF Modulator.
-E9-
1
TV
VHF/UHF
ANTENNA
IN
1
2 VHF/UHF
FROM ANT.
IN
TO TV
3 4
OUT
5
CHANNEL
VCR