Table of Contents
Advertisement
1
Wear full eye protection and ear
protection at all times while operating
the product.
NOTE: The mulching plug covers
the rear discharge opening to allow
the blade to cut and recut for finer
clippings. The product will not start
without a grass catcher or mulching
plug securely installed.
NOTE: The on/off bail must be
continuously held during use.
8
Getting started
2
1
Adjust the operating angle of the handle to your preference. Turn the quick-
release fastener 90° clockwise. Set the handle to the operating position. Turn the
fastener 90° counterclockwise, and ensure that the fastener is secured.
4
Open the battery door.
NOTE: To turn off the product, release
the on/off bail.
4
2
3
5
1
Install two battery packs. Make sure
that the latch clicks in place and that
the battery pack is secured to the
product before operating. Insert the
isolator key.
2
Advertisement
Table of Contents
