Table of Contents
Advertisement
7
6
ADJUSTING THE CUTTING HEIGHT
To adjust the cutting deck height, pull the
height adjustment lever towards the wheel,
then raise or lower the deck to the preferred
height. Make sure that the handle is always
secured into one of the six height slots.
NOTE: The cutting height can be adjusted
to 6 positions. Cutting heights may vary in
particular products. Start the mower at the
highest position, before cutting the grass.
REPLACING THE BLADES
1. Open the battery door. Remove the
battery packs. Remove the isolator key,
and close the battery door.
2. Tilt
the product on its side.
14
Operation
7
6
1
2
1
2
3
4
Advertisement
Table of Contents
