Table of Contents
Advertisement
1. Open the battery door. Insert two battery
packs into the product. Make sure that the
latch on the battery pack clicks in place,
and that the battery pack is secured
before operating the product. Insert the
isolator key. Close the battery door.
NOTE: The product does not start
without the isolator key. Ensure that the
isolator key is installed in the product.
NOTE: Ensure that battery packs are
installed in the active ports, which are the
back two ports closest to the back of the
mower.
2. For
mulching
operation,
mulching plug. Raise the rear door, and
remove the grass
catcher. Insert the
mulching plug into the rear discharge
opening and lower the rear door.
NOTE: The mulching plug covers the rear
discharge opening to allow the blade to cut
and recut for finer clippings. The product will
not start without a grass catcher or mulching
plug securely installed.
3. Press the start button, then squeeze and
hold the on/off bail to turn on the product.
Release the start button and keep holding
the on/off bail to keep using the product.
NOTE: Release the on/off bail to stop the
product.
NOTE: When the mower is turned on, pull
either side of the self-propel lever towards
the handle to engage the self-propel feature.
1
2
2
install
the
3
1
2
1
1
2
3
3
4
5
4
13
Operation
Advertisement
Table of Contents
