Bosch PBH 2500 SRE Original Instructions Manual page 16

16 | English
Rotary hammer
– Wood
Weight according to EPTA-
Procedure 01:2014
Protection class
A)
This accessory is not available in every country.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 62841-2-6:
Hammer drilling into concrete:
a
h
K
Chiselling:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
1 609 92A 8GD | (16.01.2023)
PBH 2000 RE PBH 2100 SRE
PBH 2100 RE
mm 30
kg 2.2
/II
PBH 2000 RE PBH 2100 SRE
PBH 2100 RE
dB(A) 91
dB(A) 102
dB 3
2
m/s 16.0
2
m/s 1.5
2
m/s 12.5
2
m/s 1.5
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Auxiliary handle
Do not operate your power tool without the auxiliary
u
handle (13).
Make sure that the auxiliary handle is always
u
tightened. Otherwise you could lose control of the power
tool when working.
Swivelling the auxiliary handle (see figure A)
You can swivel the auxiliary handle (13) to any angle for a
safe work posture that minimises fatigue.
– Loosen the wing bolt (12) of the auxiliary handle (13)
and adjust the auxiliary handle (13) to the required posi-
tion. Then retighten the wing bolt (12) of the auxiliary
handle (13).
Make sure that the clamping ring of the auxiliary handle
slots into the corresponding groove on the housing.
PBH 2500 RE PBH 2500 SRE
30 30
2.2 2.2
/II /II
PBH 2500 RE PBH 2500 SRE
91 94
102 105
3 3
16.0 16.0
1.5 1.5
12.5 12.0
1.5 1.5
Bosch Power Tools
30
2.2
/II
94
105
3
16.0
1.5
12.0
1.5