E Setting The Electronic Shutter (Shutter); Fast Shutter Speed (Short); Slow Shutter Speed (Long) - Sanyo VCC-MC500 Instruction Manual

Camera Settings (CAMERA)

E Setting the electronic shutter (SHUTTER)

Sets the appropriate shutter speed according to your surveillance
purpose.
The following shutter speed modes are available.

• Fast shutter speed (SHORT)

• Slow shutter speed (LONG)

SYNC
IRIS
WHITE BALANCE
BLC
SHUTTER
APERTURE
AGC
GAMMA
DAY/NIGHT
PRESET
MENU
If you do not use the electronic shutter, set [SHUTTER] to "OFF".
The electronic shutter cannot be set in the following
conditions.
• For the auto iris setting, the electronic sensitivity
setting is activated. (When the [IRIS] is set to "AUTO",
[SENSE UP] in the IRIS SETTING screen is set to other
than "OFF".)
• For the manual iris setting, the electronic iris is
activated. (When the [IRIS] is set to "MANU", [EI] is
set to "ON".)
b Fast shutter speed (SHORT)
When viewing fast-moving target objects, higher shutter speed
produces clearer images with less blurs.
1
Use the joystick lever (xy) to select [SHUTTER],
use the lever (vw) to select "SHORT y", and press
the [ENTER] button.
The ES SETTING screen appears.
ES SETTING
SHUTTER SPEED
PRESET
MENU
2
Use the joystick lever (vw) to select the desired
shutter speed.
Available settings: 60, 100, 250, 500, 1000, 2000, 4000,
10000 (1/N sec.)
To avoid flicker
If the camera is installed under fluorescent lighting and
the power supply frequency is 50Hz, set the shutter
speed to "100 (1/100 sec)" to avoid flicker.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
INT
AUTO y
ATW y
OFF
SHORT
y
ON y
ON
y
0.45
AUTO
y
OFF
BACK
60
OFF
BACK
b Slow shutter speed (LONG)
When the target object is in dark condition, making the exposure time
longer increases sensitivity, enabling you to view target object more
brightly. Select desired shutter speed according to the shooting
conditions.
The initial setting for slow shutter spped (LONG) is "x1".
1
Use the joystick lever (xy) to select [SHUTTER],
use the lever (vw) to select "LONG y", and press
the [ENTER] button.
The ES SETTING screen appears.
ES SETTING
SHUTTER SPEED
PRESET
MENU
2
Use the joystick lever (vw) to select the desired
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32
(Each option represents a multiple of field
time. The higher the number, the longer
the exposure time.)
When the exposure time is longer, moving objects may
cause conspicuous afterimages, blurs and white spots.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
x1
OFF
BACK
16