Returning Automatically To The Specified Surveillance Mode (Auto Return) - Sanyo VCC-MC500 Instruction Manual

Auto Mode Settings (AUTO MODE)
Returning automatically to the
D specified surveillance mode (AUTO
RETURN)
You can automatically return the surveillance status to the
specified surveillance mode after the specified duration has
passed without any operations.
AUTO MODE
SEQUENCE
AUTO PAN
TOUR
AUTO RETURN
TIME
PRESET
MENU
1
Use the joystick lever (xy) to select [AUTO
RETURN] and use the lever (vw) to select the
surveillance mode to return to automatically.
Available settings:
• OFF: Disables the AUTO RETURN function.
• SEQ A - D: Sequence mode (A - D)
• PAN 1 - 4: Auto Pan mode (1 - 4)
• TOUR 1 - 4: Tour mode (1 - 4)
• PRESET: Preset position (1 - 127)
2
When you select "PRESET" in step 1, use the
joystick lever (y) to select [PRESET-], and use the
lever (vw) to select a preset number.
The preset number selection field is displayed only when
"PRESET" is selected.
AUTO MODE
SEQUENCE
AUTO PAN
TOUR
AUTO RETURN
TIME
PRESET-
PRESET
MENU
Available settings: 1 - 127
3
Use the joystick lever (xy) to select [TIME] and use
the lever (vw) to select the duration until the AUTO
RETURN function is activated.
Available settings: 10S, 20S, 30S, 40S, 50S, 1M, 2M, 3M,
4M, 5M, 6M, 7M, 8M, 9M, 10M
(S: Second, M: Minute)
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
37
A y
1 y
1 y
SEQ A
1M
OFF
BACK
A y
1 y
1 y
PRESET
1M
1
OFF
BACK