Philips MULTIGROOM 5000 Series Manual page 11

1
2
1
2
Grooming facial hair (nose and ear hair)
Trimming nose hair
1 Place the nose/ear hair trimmer on the handle (1)
and turn it clockwise to fix it (2).
2 Make sure your nostrils are clean.
3 Switch on the appliance and insert the tip of the trimmer into one of
your nostrils.
Do not insert the tip more than 0.5cm into your nostril.
4 Slowly move the tip in and out while turning it round at the same
time to remove unwanted hair.
To reduce the tickling effect, make sure that you press the side of the
tip firmly against the skin.
Trimming ear hair
1 Place the nose/ear hair trimmer on the handle (1) and turn it
clockwise to fix it (2).
2 Clean the outer ear channel. Make sure it is free from wax.
3 Switch on the appliance and move the tip softly round the ear to
remove hairs that stick out beyond the rim of the ear.
4 Carefully insert the tip into the outer ear channel.
Do not insert the tip more than 0.5cm into the ear channel as this could
damage the eardrum.
ENGLISH
11