Advertisement
022552_23661_8820-
00396_F7D4401_v1_Play_Max_Modem_Router_02082010_update_0325-2010-ok
Note: If you are configuring the Router over a wireless
connection, you will have to reconnect to the Router after
changing any security settings.
Note: Some older networking hardware supports only 64bit
WEP encryption. If your older computers cannot connect to
your network, try 64bit WEP.
A disk I plugged into the USB port is not showing up on my computer or in
Memory Safe.
1) Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and replugging the disk. Please check
that the USB connector is firmly plugged into the Router.
2) If your disk has an optional power supply, please use it while
the disk is attached to your Router.
3) The Router supports FAT16, FAT32, or NTFSformatted disks.
Disks in other formats will not appear in the Finder (Mac OS
X) or Windows Internet Explorer.
A printer I plugged into the USB port is not showing up on my computer.
1) Is the light on over the USB port that the printer is plugged
into? If not, try unplugging and replugging the printer.
Please check that the USB connector is firmly plugged into
the Router.
2) To print to a printer attached to the Router, your computer
must have that printer's driver installed. Please check that
the driver is installed.
3) The printer may not be set to autoconnect. Via the Belkin
Router Manager, open the USB Print and Storage Center.
Check that the printer appears in the list of available devices.
View the properties of the printer, and check that "auto
connect" is selected.
A different sort of USB device that I plugged into the USB port is not showing up
on my computer.
Advertisement
