Ethernet Host Interface - Bosch APC-AMC2-4R4CF Installation Manual

Access Modular Controller 2
4.8

Ethernet Host Interface

The AMC2-4R4 offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 43.
Notice!
After connecting a new AMC2 device to a network using DHCP, it can take some time before
the new AMC2 device is recognized by the remote server.
You can accelerate this process by running the following command:
ipconfig /flushdns
This makes the AMC2 device immediately available by its name.
Bosch Security Systems B.V. Installation manual
Installing | en 21
2020-01 | V02 |