Connections - Sanyo VCC-6574 Instruction Manual

CONNECTIONS

(Video signal connections)
: VIDEO IN
: VIDEO OUT
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.), AC adaptor
and cables are sold separately.
1
Make the video signal connection between the camera and the
monitor or time lapse VCR.
2
Insert the plug of this power cord into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls etc.
Coaxial cable type and maximum length
•
Cable type RG-59U (3C-2V), 250 m maximum.
•
Cable type RG-6U (5C-2V), 500 m maximum.
•
Cable type RG-11U (7C-2V), 600 m maximum.
1
AC 24 V
~ ~
GND
CAUTION:
•
•
(A)
AC 24 V connection
Push to insert the cable
The RG-59U type cable should not be run through electrical
conduits or through the air.
Using CCTV/Video-grade coaxial cable.
2
10
English