Sanyo VCC-6594P Service Manual

SERVICE MANUAL

COLOUR CCD Camera

SPECIFICATIONS

Scanning system : PAL standard (625 TV lines, 25 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/3 inch solid state image device CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync, Line lock manually switchable
Resolution : 520 TV lines horizontally, 400 TV lines vertically
Video output level : 1.0 Vp-p/75 Ω, composite
Video S/N ratio : More than 48 dB
Minimum required illumination : Approx. 0.3 lux with a F 1.2 lens (AGC, HI)
(incandescent lighting)
Backlight compensation : Manual MULT/CENT/OFF switching
(Active when using an auto-iris lens)
Iris function : AI/EI selectable by switches (Electronic shutter)
Electronic iris range : 0.6 lux to 50,000 lux (F1.2, lens)
Electric shutter : 7 speeds, selectable by switches: (1/50, 1/120, 1/500,
1/1000, 1/2000, 1/4000, 1/10000 sec.)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount
AGC : HI/NORM
Environmental conditions : Temperature: -10 °C ~ + 50 °C
Humidity: less than 90 % (no condensation)
Power supply : 24 V AC, 50 Hz
Power consumption : Approx. 2.8 W (with auto iris lens)
Approx. 2.1 W (without auto iris lens)
Weight : Approx. 310 g (without lens)
Dimensions : 56 (W) mm x 45 (H) mm x 109 (D) mm
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
L53H4/XE
Approx. 0.6 lux with a F 1.2 lens (AGC, NORM)
PRODUCT SAFETY NOTICE
FILE NO.
VCC-6594P
(Product Code : 117 108 04)
(South East Asia)
(Europe)
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION ............................. 3
3. ADJUSTMENT ..................................... 4
4. PARTS LIST .........................................7
SCHEMATIC DIAGRAM
REFERENCE No. SM5310325