Econo/Outdoor Unit Quiet Operation - Daikin FTHF25XVMV Operation Manual

READ BEFORE OPERATION

ECONO/OUTDOOR UNIT QUIET Operation

ECONO operation enables efficient operation by limiting the maximum power
consumption. This function is useful to prevent the circuit breaker from tripping
when the unit operates alongside other appliances on the same circuit.
OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by
changing the frequency and fan speed of the outdoor unit. This function is
convenient during the night-time operation.
„ To start
„ To cancel
NOTE
„ Notes on ECONO operation
• ECONO Operation can only be set when the unit is running. Pressing
to be cancelled, and "
• If the power consumption level is already low, switching to ECONO operation will not reduce the
power consumption.
• This operation is performed with lower power and therefore may not provide sufficient cooling
(heating) effect.
„ Notes on OUTDOOR UNIT QUIET operation
• Even if the operation is stopped by using the remote controller or the indoor unit ON/OFF switch when
using OUTDOOR UNIT QUIET operation, "
• OUTDOOR UNIT QUIET operation will not reduce the frequency nor fan speed if they already
are operating at reduced levels.
• This operation is performed with lower power and therefore may not provide sufficient cooling
(heating) effect.
„ Possible combinations of ECONO/OUTDOOR UNIT QUIET operation and basic operations
ECONO
OUTDOOR UNIT
QUIET
20
Press and select the desired mode.
• Each time is pressed, a different setting option appears on the LCD.
ECONO OUTDOOR UNIT
Press until no icon is displayed.
" disappears from the LCD.
" will remain displayed on the remote controller.
AUTO DRY
–
Combination
QUIET
Operation mode
COOL HEAT
blank
No Setting
causes the settings
FAN
–
–