Clearing The Nozzle Surface Of The Print Cartridge - Fujitsu fi-475PR User Manual

(4) Cleaning the Nozzle Surface of the Print Cartridge
Ink or stains stuck to the nozzle surface of the print cartridge or leaving the imprinter unused for a while cause poor
printing of characters because of stopped emission holes of the nozzle. If your imprinter has this trouble, clean the nozzle
surface of the print cartridge.
For cleaning, use dry cloth or waste free from dust, and gently wipe off dirt and stain from the surface of the nozzle.
(Do not use tissue paper.)
Clean the nozzle surface as follows:
1
Remove the print cartridge. (Refer to Item (1) in this
chapter.)
3
Make sure that dirt and stain are all removed and then mount the print cartridge. (Refer to Item (1) in this chapter.)
Dry cloth
15
2
Gently wipe off dirt and stain from the nozzle
surface.
Nozzle surface