Preparing Media - Panasonic SC-PM702 Operating Instructions Manual

Preparing media

Disc
1
Press [CD x] (main unit: [x]) to open the disc tray.
Put in a disc with the label facing up.
Press again to close the disc tray.
2
Press [USB/CD] (main unit: [SELECTOR]) repeatedly to select "CD".
USB
Preparation
Before you connect a USB device to the system, make sure you do a backup of the data.
1
Decrease the volume and connect the USB device to the USB port.
Hold the main unit when connecting or disconnecting the USB device.
2
Press [USB/CD] (main unit: [SELECTOR]) repeatedly to select "USB".
Note:
Do not use a USB extension cable. The system cannot recognise USB device connected through a cable.
Bluetooth
®
You can connect and play an audio device wirelessly through Bluetooth
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
• Read the operating instructions of the device for details.
Pairing a device
█
Preparation
If this system is connected to a Bluetooth
1
Press [ ].
If "PAIRING" is shown, continue with step 3.
2
Press [PLAY MENU] to select "PAIRING" and then press [OK].
3
Select "SC-PM702/PM704" or "SC-PM700" from the Bluetooth
If prompted for a passkey, input "0000".
The device connects with this system automatically after pairing is complete.
The name of the connected device is shown for a few seconds.
Using the main unit
1
Press and hold [–
2
Select "SC-PM702/PM704" or "SC-PM700" from the Bluetooth
Note:
You can pair up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the
12
longest time will be replaced.
feature of the device and put the device near the system.
®
device, disconnect it (~13).
®
PAIRING] until "PAIRING" is shown.
.
®
menu of the device.
®
menu of the device.
®