Table of Contents
Advertisement
Notice to Installers
The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions, unless you are qualified to do so.
Note to System Installer
For this apparatus, the coaxial cable shield/
screen shall be grounded as close as practical
to the point of entry of the cable into the building.
For products sold in the US and Canada, this
reminder is provided to call the system installer's
attention to Article 820-93 and Article 820-100 of
the NEC (or Canadian Electrical Code Part 1),
which provides guidelines for proper grounding
of the coaxial cable shield.
This symbol is intended to alert you that
uninsulated voltage within this product may
have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
All manuals and user guides at all-guides.com
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION: To reduce the risk of electric
shock, do not remove cover (or back).
No user-serviceable parts inside. Refer
servicing to qualified service personnel.
WARNING
This symbol is intended to alert you of
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying this product.
20070112 SysInstaller 820 English
Advertisement
Table of Contents
