Table of Contents
Advertisement
operation, wipe away the water from the cooking
compartment floor.
The remaining water is pumped back into the water
tank after every operation with steam. Then empty and
dry the water tank. Moisture remains in the cooking
compartment. To dry the cooking compartment, you
can either use the "Drying function" operating mode or
dry the cooking compartment by hand.
Notes
Once the appliance has been switched off, the
■
field remains lit for a little longer to remind you to
empty the water tank.
Remove limescale marks with a cloth soaked in
■
vinegar, then wipe with clean water and dry with a
soft cloth.
Emptying the water tank
Caution!
Do not dry the water tank in the hot cooking
■
compartment. This will damage the water tank.
Do not clean the water tank in the dishwasher. This
■
will damage the water tank.
Open the control panel.
1.
Remove water tank.
2.
Carefully remove the lid of the water tank.
3.
Empty the water tank, clean it with detergent and
4.
then rinse it thoroughly with clean water.
Dry all parts with a soft cloth.
5.
Rub the seal on the lid until dry.
6.
Leave to dry with the lid open.
7.
Place the lid on the water tank and push it down.
8.
Insert the water tank and close the control panel.
9.
Cleaning the drip trough
Allow the appliance to cool down.
1.
Open the appliance door.
2.
Wipe around the drip trough
3.
cooking compartment with a sponge cloth (fig.
Starting the Drying function
During drying, the cooking compartment is heated up
so that the moisture in the cooking compartment
evaporates. Then open the appliance door so that the
steam escapes.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
X
underneath the
‚
).
!
Leave the appliance to cool down.
1.
Remove the worst dirt from the cooking
2.
compartment immediately and wipe away moisture
from the cooking compartment floor.
If necessary, press the On/Off button to switch on
3.
the appliance.
Press the menu button.
4.
The list of operating modes are displayed.
Touch the "Next" field.
5.
Touch the "Drying function" field.
6.
Press the Start/Stop button.
7.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door and leave it open for 1 to 2
8.
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
Leave the appliance to cool down.
1.
Remove any dirt from the cooking compartment.
2.
Dry the cooking compartment with a soft cloth.
3.
Leave the appliance door open for one hour so that
4.
the cooking compartment dries completely.
@Meat thermometer
The meat thermometer Plus makes precise cooking
M e a t t h e r m o m e t e r
possible. It measures the temperature inside the food.
Once the set temperature has been reached, the
appliance automatically switches itself off.
Heating modes
Once you have placed the meat thermometer in the
cooking compartment, the following heating modes are
available for you to select.
For some types of heating, you can combine the type of
heating with the microwave or steam. Switch to the
"Microwave combination or steam" operating mode.
4D hot air
:
Hot air eco
'
Top/bottom heating
%
Top/bottom heating eco
+
Pizza setting
;
Hot air grilling
4
Intensive heat
&
Reheating
W
Notes
The meat thermometer measures the temperature
■
on the inside of the food between 30 °C and 99 °C.
Use only the meat thermometer supplied. You can
■
purchase it as a spare part from the after-sales
service.
After use, always remove the meat thermometer
■
from the cooking compartment. Never store it inside
the cooking compartment.
Meat thermometer
Microwave or steam function
Microwave or steam function
Microwave or steam function
en
23
Advertisement
Table of Contents
