JVC D-ILA DLA-VS4800G Instructions Manual page 47

indicates the factory default.
Item
E-Mail Setting
E-Mail
E-Mail Sender
E-Mail Address
SMTP Server
Address
E-Mail Auth.
Auth. Type
Auth. User
Account
Auth. Password
Port No.
Set
Test Mail
Setting Value
ON
OFF
^
(Default Value: lower 3
bytes of the MAC address)
^
(Default Value:
user@localhost)
^
(Default Value: 1.1.1.1)
ON
OFF
PLAIN
LOGIN
CRAM-MD5
^
^
25
465
587
^
^
Description
For configuring the e-mail feature.
ON : Use the mail feature.
OFF : Do not use the mail feature.
For specifying the destination e-mail address of this
projector.
For specifying the destination e-mail address.
NOTE:
● Specify an address up to a maximum of 64 characters.
● Make use of single-byte alphanumeric characters and
A-B A.B A_B A@B.
For specifying the address of the outgoing mail server
(SMTP).
NOTE:
● Specify an address up to a maximum of 15 characters.
● Make use of numbers and A.B.
ON : Enable the e-mail authentication feature.
OFF : Disable the e-mail authentication feature.
For configuring the e-mail authentication type.
PLAIN : Set e-mail authentication to APLAINB.
LOGIN : Set e-mail authentication to ALOGINB.
: Set e-mail authentication to ACRAM-
CRAM-MD5
MD5B.
For configuring the account name during e-mail
authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and A-B.
For configuring the password during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and A-B.
For configuring the SMTP server port number when using
the e-mail authentication feature.
The details of the configuration will be saved.
When the ASENDB button is clicked, the test mail with the
contents configured in the E-Mail Setting will be sent.
47