Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial or dish, use this function. (DVB)
All DVB channels found are added to
●
■
DVB-S
Please consult the received satellite broadcasting companies for the
●
setting.
1. Select
Transponder Frequency
Service ID
and set with
2. Select
Start scan
■
DVB-C
1. Enter the frequency with
Normally set
Symbol Rate
●
2. Select
Start scan
■
DVB-T
1. Select a channel and adjust frequency for each channel.
Set where the level of
●
2. Press
OK
to search.
■
Analogue
Set Analogue channel manually after
Set
Sound System
●
Normally set
Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
or
Update Channel List
/
Symbol Rate
Cursor buttons
and press
OK
to search.
Numeric
buttons.
and
Service ID
and press
OK
to search.
Signal Quality
Auto
and
Colour
System, and then perform this function.
to Auto.
- 120 -
to retune DVB channels.
Channel
List.
/
Polarisation
or
Numeric
buttons.
to Auto.
becomes the maximum.
Setup.
/
Modulation
/