Table of Contents
Advertisement
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
3. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
DVB-via-IP
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
1. Select
Auto Setup
2. A confirmation screen is displayed and press
3. Select a server from
1) Select a server and press
2) Select
Search Channels
4. Select a search mode and press
5. Set
Client
Settings.
1) Select
Client Settings
2) Select
Unicast Environment
set.
Select
Unicast Environment
●
Select
Multicast Environment
●
hotel, hospital, etc. (All servers are selected automatically.)
3) Select
Server List
6. Select
Search Channels
7. Set
DVB-via-IP Search Mode
are made automatically.)
Set
DVB-via-IP Satellite Configuration
●
When the operation is completed, the channel at the lowest position will
●
be displayed.
Symbol Rate
Numeric
buttons.
Start scan
and press
and press
OK
to access.
Server
List.
OK
to set.
and press
OK
to access.
and press
OK
/
Multicast Environment
to use in a home network.
to use in multi family housing units,
and press
OK
to access.
and press
OK
and press
- 118 -
and
Network ID
to Auto. If
OK
to search.
OK
to start
Auto
OK
to access.
OK
to access.
to access.
and press
to access.
OK
to start
Auto
Setup. (Settings
to tune DVB-S channels.
Auto
Setup.
OK
to
Advertisement
Table of Contents
