Table of Contents
Advertisement
DVB-via-IP Server Selection
■
Preparations
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
Ensure the server settings are completed. For details, read the manual of
●
DVB-via-IP server.
■
DVB-via-IP Server Selection
1. Display the menu with MENU.
2. Select
Setup
>
Tuning Menu
3. Select
DVB-via-IP
4. Select
Start Auto Setup
5. Select a server from
6. Select
Client Settings
1) Select
Unicast Environment
set.
Select
Unicast Environment
●
Select
Multicast Environment
●
hotel, hospital, etc. (All servers are selected automatically.)
2) Select
Server List
7. Select
Search Channels
8. Select a search mode and press
9. Set
DVB-via-IP Search Mode
are made automatically.)
Set
DVB-via-IP Satellite Configuration
●
Set
DVB-via-IP Cable Configuration
●
When the operation is completed, the channel at the lowest position will
●
be displayed.
= Note =
If tuning has not been done completely, set
●
Watching > Tuning and editing channels > Manual Tuning
Depending on the network condition and broadcast, this function may not
●
be available.
>
Add TV Signal
and press
OK
to access.
and press
OK
Server List
and press
and press
OK
to access.
/
Multicast Environment
to use in a home network.
to use in multi family housing units,
and press
OK
to access.
and press
OK
OK
to access.
and press
- 245 -
and press
OK
to access.
OK
to set.
and press
to access.
OK
to start
Auto
Setup. (Settings
to tune DVB-S channels.
to tune DVB-C channels.
Manual
Tuning.
to access.
OK
to
Advertisement
Table of Contents
