Manual Tuning - Panasonic TX-50CX700E Ehelp

Manual Tuning

Normally use Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found are added to
●
■
DVB-C
1. Enter the frequency with
Normally set
●
2. Select Start scan
■
DVB-T
1. Select a channel and adjust frequency for each channel.
Set where the level of
●
2. Press OK to search.
■
Analogue
Set Analogue channel manually after
Set Sound System
●
Normally set Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with
2. Select the channel with
3. Set Manual Tuning.
or Update Channel List
Numeric buttons.
Symbol Rate and Service ID
and press OK to search.
Signal Quality
Auto
and Colour System, and then perform this function.
to Auto.
Numeric
Channel Up /
- 112 -
to retune DVB channels.
Channel List.
to Auto.
becomes the maximum.
Setup.
buttons.
Down.