HP DesignJet 750C Plus Quick Reference Manual page 7

To Load Roll Media
1 Hold the media by both edges and align its right edge with the
perforated line on the entry platen.
2 Insert the media into the plotter, until it buckles slightly.
3 When the plotter begins to pull in the media, let it go.
4 Press next to the front-panel display to indicate you are
loading roll media.
Sheet load
Roll load
5 Scroll until the display shows the type of media you are
loading*, and then press the
SELECT MEDIA
Opaque bond
*For advice on media types, see pages 12 and 13.
1839
All manuals and user guides at all-guides.com
A
––––––––>
––––––––>
key.
Enter
Enter
5
A
Media path
0017
Continued...
0014