HP DesignJet 750C Plus Quick Reference Manual page 10

To Load a Sheet
You can load a sheet in either portrait or landscape orientation:
Note: If you are using the
will influence the orientation of your print.
The plotter prints on the underside of the sheet. If the two sides of
your media are different, make sure the printing side is underneath
(see page 9).
1 Make sure the media lever is down and the roll cover is closed.
2 Hold the sheet by the sides and align the right edge with the
perforated line on the entry platen.
3 Insert the media until it buckles slightly.
4 When the plotter begins to pull in the sheet, let it go.
Press next to the front-panel display to indicate you are loading
a sheet.
Sheet load
Roll load
All manuals and user guides at all-guides.com
or
option (see User's Guide), this
Rotate
––––––––>
––––––––>
8
1841
0014