Connectors And Buttons - Axis P5514 PTZ User Manual

AXIS P5514 PTZ Network Camera
Hardware Overview
1
Mounting plate
2
Mounting plate screws (3x)
3
Bracket arm (3x)
4
Bracket arm screw (3x) and washer (3x)
5
Mounting bracket
6
Trim ring
7
Safety wire
8
Unit holders (3x)
9
Camera base lid
10 Camera base lid screws (4x)
11 Hook for safety wire
12 Part number (P/N) & Serial number (S/N). Serial number may be required during installation.
13 Cable tracks
14 Multi-connector
15 Top cover screws (4x)
16 Top cover
17 Rubber gasket

Connectors and Buttons

For technical specifications, see page 65.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
8