Video And Audio; Set Up Video Streams - Axis P5514 PTZ User Manual

Ptz network camera
Table of Contents

Advertisement

AXIS P5514 PTZ Network Camera
Set Up the Product

Video and Audio

The video and audio settings can be used to optimize video and audio quality. You can configure the following:
Video stream settings. See page 20.
Stream profiles. See page 21.
ONVIF Media Profiles. See page 22.
Camera settings. See page 22.
Overlay image. See page 23.
Audio settings. See page 25.
Audio clips. See page 27.

Set Up Video Streams

To set up the product's video streams, go to Video & Audio > Video Stream.
The video stream settings are divided into the following tabs:
Image. See page 20.
Audio. See page 25.
H.264. See page 21.
MJPEG. See page 21.
Pixel Counter
The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is
a specific size requirement, for example in face recognition.
The pixel counter can be used:
When setting up a video stream, see Set Up Video Streams on page 20. Under Preview, click Open and select the Show
pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the
number of pixels in the Width and Height fields and click Apply.
Image
The default image settings can be configured under Video & Audio > Video Stream. Select the Image tab.
The following settings are available:
Resolution. Select the default resolution.
Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the
compression, the higher the image quality with higher bandwidth requirements and larger file sizes.
Rotate image. If required, the image can be rotated.
Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed
amount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highest
frame rate possible under the current conditions.
Overlay settings. See Overlay on page 23.
Click Save to apply the new settings.
20

Advertisement

Table of Contents
loading

Table of Contents