Led Indicators - Axis P5514 PTZ User Manual

AXIS P5514 PTZ Network Camera
Hardware Overview
Configurable (Input
or Output)
For an example diagram, see Connection Diagrams on page 67.
I/O connector
1 2 3 4 5 6

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
3–6
Digital input – Connect to pin 1 to activate, or leave
floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when activated,
floating (unconnected) when deactivated. If used with
an inductive load, e.g. a relay, a diode must be connected
in parallel with the load, for protection against voltage
transients.
DC power input
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable or lost.
AC power input
10
0 to max 40 V DC
0 to max 40 V DC, open
drain, 100 mA