Camera Control - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to configure the pan and tilt operations of your camera. You can specify the lens location for the Home button, and specify
up to 24 preset lens locations, allowing you to quickly view these predetermined areas of the camera's range from the Live Video screen.
Pan/Tilt Wheel:
Use the directional arrows on the wheel to move the camera lens
through its pan and tilt ranges.
Set as Home: Click Set as Home to set the current lens location as the Home location.
Once set, the camera will return to this location whenever you click
the Home button in the center of the pan/tilt wheel.
Default Home: Click Default Home to return the Home location to the factory default
setting.
Pan Step:
Select a number that controls how much the camera should move
up or down each time the user presses the up/down (pan) arrow on
the pan/tilt wheel.
Tilt Step:
Select a number that controls how much the camera should move
left or right each time the user presses the left/right (tilt) arrow on
the pan/tilt wheel.
Preset Position: The camera allows you to specify up to 24 predetermined lens
positions, which can be used to quickly move the camera's view to
areas of interest.
• Select a number for the Preset Position that you would like to define.
• Use the pan/tilt wheel to move the camera's lens to the desired
preset position.
• Enter a Preset Name to help you easily identify the preset.
• Click on the Set button to save the preset.
• Preset positions can be cleared by selecting the desired preset name
and clicking on the Clear button.
D-Link DCS-5010L User Manual

Camera Control

44 44